节点文献

高锰钢中碳化物的形成特征及其高温固溶行为研究

Study on the Formation of Carbide in High ManganeseSteel and its Solution at Elevated Temperature

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘俊友伍燕生魏立王士本闫涛刘卫东

【Author】 LIU Jun you 1,2 , WU Yan sheng 2,WEI Li 2, WANG Shi ben 2,YAN Tao 3,LIU Wei dong 3 (1 Beijing University of Science and Technology, Beijing 100083,China;2 Hebei University of Science and Technology, Shijiazhuang 050054, China;3 Shijiazhuang Chain Wheel factory,Shijiazhuang 050054,China)

【机构】 北京科技大学材料科学与工程学院河北科技大学材料科学与工程学院石家庄链条总厂石家庄链条总厂 北京100083河北科技大学材料科学与工程学院石家庄050054石家庄050054

【摘要】 通过观察高锰钢高温淬火和 Si- Ca变质组织 ,指出高锰钢中的碳化物在高温淬火和变质处理过程中均能形成 ,并在一定条件下以团球状弥散分布于奥氏体晶粒内。此外 ,利用高温金相观察了高锰钢组织在加热或高温保温过程中的变化。发现碳化物溶入奥氏体的过程伴随着晶粒的长大。晶粒长大的方式是晶界迁移和大晶粒吞并小晶粒。表面组织层磨发现 ,表层碳化物溶解后 ,将留下小的孔洞。上述结果对开发不经热处理高锰钢及高锰钢热处理工艺的确定具有重要的参考价值

【Abstract】 The carbides in high manganese steel can be formed during quenching at elevated temperatures and by modification treatment The carbides look like nodular and distribute in the austenite (γ) grains under some conditions Observed by high temperature morphology, it ia found that the carbides in as cast can be solved into γ at elevated temperature Meanwhile the γ crystal grows fast and its growth routes are the boundary migration and the means of the larger grains annexing the small ones When polished layer by layer, we found that the cavities are left at the surface after the carbides solved into the γ These results are of great valuable for developing the high manganese steel without heat treatment and determining the heat treatment process of high manganese steel

【基金】 河北省自然科学基金资助项目 ( 5 0 12 49)
  • 【文献出处】 材料工程 ,Journal of Materials Engineering , 编辑部邮箱 ,2003年03期
  • 【分类号】TG142
  • 【被引频次】28
  • 【下载频次】750
节点文献中: 

本文链接的文献网络图示:

本文的引文网络