节点文献
Ti-2Al-2.5Zr合金在300℃碱性水中氧化的表面分析
Surface Analysis of Ti-2Al-2.5Zr Alloys Oxidized at 300℃ in Alkaline Water
【摘要】 利用原位 AES深度分析 ,XRD,和 XPS方法研究了 Ti- 2 Al- 2 .5 Zr合金在 30 0℃碱性水中氧化 130 0 0 h所形成的氧化膜的结构、成分和价态 ,及其随深度的变化。结果表明 ,氧化膜是由板钛型 Ti O2 、Al2 Ti O5(Ti O2 ·Al2 O3) ,Ti3O5,Ti2 O3和 Ti O所组成 ,氧化膜由表面到基体基本是按以上顺序交迭构成。通过 XPS和原位 AES分析发现钛合金表面形成由 Ti O2 ,Al2 Ti O5(Ti O2 ·Al2 O3) ,Ti3O5组成的较为稳定的厚约 80 0 nm的 Ti4 + (Ti O2 )层 ,随深度的增加出现了 Ti3+ (Ti3O5,Ti2 O3)和 Ti2 + (Ti O) ,直至基体 ,氧化膜总厚度约 30 0 0 nm。
【Abstract】 The oxide scale on Ti 2Al 2 5Zr alloys at 300℃ in Alkaline water was investigated XRD, XPS and in situ AES techniques were used to study the microstructure, composition and valence of Ti of the oxide scale The results show that the oxide scale on Ti 2Al 2 5Zr alloy is composed of Al 2TiO 5(TiO 2·Al 2O 3),TiO 2 ,Ti 3O 5 ,Ti 2O 3 ,Al 2O 3 and TiO The total thickness of the oxide scale is about 3000nm The compact thick 800nm scale with the mixture of brookite TiO 2 and Al 2TiO 5 is formed near surface
【Key words】 Ti 2Al 2 5Zr; Oxidation on Ti base alloys; In situ AES technique; XPS technique;
- 【文献出处】 材料工程 ,Journal of Materials Engineering , 编辑部邮箱 ,2003年01期
- 【分类号】TG178
- 【被引频次】6
- 【下载频次】100