节点文献

喷射沉积 6061/SiC_p 复合材料的组织与拉伸性能

MICROSTRUCTURE AND TENSILE PROPERTIES OF 6061/SiC p COMPOSITES PRODUCED BY MULTI LAYER SPRAY Co DEPOSITION

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 孙亦张豪陈振华

【Author】 Sun Yi Zhang Hao Chen Zhenhua (Nonequilibrium Materials Science and Engineering Research Institute, Central South University of Technology, Changsha, 410083, China)

【机构】 中南工业大学非平衡材料科学与工程研究所

【摘要】 采用多层喷射共沉积法制备了6061铝合金/10%SiC颗粒增强复合材料,对其显微组织和拉伸性能进行了研究.结果表明,沉积坯组织为细小、均匀的等轴晶,增强相颗粒分布均匀,基体与增强相颗粒间没有发生界面反应.增强相颗粒加速了沉淀相析出并明显缩短峰时效时间,沉积坯热挤压后经5h时效即可达到峰时效状态,此时力学性能为:σb439MPa,σ0.2409MPa,δ10.4%,E120GPa.

【Abstract】 SiC p composites were produced by multi layer spray Co deposition technology. Its microstructure and tensile properties were investigated. The results show that, the as deposited preform is composed of very fine equiaxed grains; the distribution of the reinforcement particles is homogeneous; chemical reactions at the metal/reinforcement particles interface are avioded. The reinforcement particles enhance precipitation and significantly reduce the time to attain peak age; after extrusion, the materials get to the peak age condition in 5 h and show mechanical properties as: σ b 430 MPa; σ 0 2 409 MPa; δ 10 4%; E 120 GPa.

【基金】 国家“九五”科技攻关计划资助
  • 【分类号】TB333
  • 【被引频次】8
  • 【下载频次】84
节点文献中: 

本文链接的文献网络图示:

本文的引文网络