节点文献
熔岩样品中微量 Am、Cm 的分析
THE ANALYSIS OF TRACE Am AND Cm IN MOLTEN ROCK SAMPLES
【摘要】 研究了从熔岩样品中提取和纯化Am、Cm的方法。实验结果表明:DHDECMP-Kel-F反相色层法是从复杂体系中提取锕系和镧系元素的有效方法。用pH=3.0的H5DTPA-乳酸混合溶液,从CL-P204萃淋树脂柱上可完成超钚和稀土元素的分离。以pH=1.0的H5DTPA-乳酸溶液能快速地从CL-P204树脂柱上回收到纯净的Am、Cm,通过将Am(Ⅲ)氧化到Am(Ⅴ)来完成Am与Cm的分离。全流程的化学回收率约为80%,Am、Cm互相污染均小于1%,对U、Pu、总裂变产物和稀土的去污系数分别为4.0×105、3.0×105、1.8×104、2.0×104,α放射性测量的不确定度好于0.5%。
【Abstract】 method of extracting from the molten rock samples and purifying the transplutonium elements is presented. It is showed that versephase chromatography on DHDECMPKelF resin is effective to extract the lanthanides and actinides from a complex system. H5DTPAlactate of pH=3 is used for sepatation of transplutoniums from rareearth elements on CLP204 while the same agent of pH=1 can strip Am and Cm from the CLP204 resin. Separation between Am and Cm is carried out by oxidation of Am(Ⅴ). The overall recovery of Am and Cm is about 80 % and the crosscontamination of them is less than 1 %. The decontamination factors of U, Pu, fission products and rare earth elements are 4.0×105, 3.0×105, 1.8×104 and 2.8×104 , respectively.
- 【文献出处】 原子能科学技术 ,ATOMIC ENERGY SCIENCE AND TECHNOLOGY , 编辑部邮箱 ,1998年S1期
- 【分类号】TL276
- 【下载频次】38