【摘要】 目的为电容引信实现定向起爆控制提供理论技术基础．方法利用３个等方位分布的电极阵列探测器获取目标方位信息，依据它对铸铁板的目标特性建立目标方位信号识别准则，信号处理采用ＤＳＰ技术．结果①双电极电容引信的探测方向图呈近似球形；②所建立的目标方位识别准则可使其方位探测精度不大于３０°．结论所述电容引信目标定向探测方法技术可行，其方位识别精度与理论分析吻合．更多还原

【Abstract】 Aim\ To provide theoretical and technical basises for the directional control of the detonation of the capacitance fuze Methods\ The directional information of a target was got by a detector possessing an electrodearray arranged in three symmetrical directions According to the detecting features of the multielectrode detector to a piece of cast iron plate, the signal recognition criteria, on which the position angle of a target can be determined, were set up DSP technique was used in the signal processing Results\ ① The detecting orientation diagram of the capacitance fuze with twoelectrode was roughly similar to a sphere; ② Using the directional recognition criteria set in this article, the detecting precision of a target′s direction was not more than 30° Conclusion\ The mentioned detecting method of the target′s direction with a capacitance fuze is practicable The acquired recognition precision of a target′s direction is in full agreement with that of the theoretical analysis更多还原