节点文献

气氛加压烧结氮化硅陶瓷气门导管

Silicon Nitride Valve Guide Fabricated by GPS

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李文兰庄汉锐罗新宇徐素英

【Author】 Li Wenlan Zhuang Hanrei Luo Xinyu Xu Suying(Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050,PRC)

【机构】 中国科学院上海硅酸盐研究所中国科学院上海硅酸盐研究所 上海 200050上海 200050上海 200050

【摘要】 采用气氛加压烧结技术制备了高性能氮化硅陶瓷材料,其室温抗弯强度和断裂韧性分别为700~800MPa和7~8MPa·m1/2。用该材料研制成的氮化硅陶瓷气门导管装配在无水冷发动机中试验性能良好,经700h台架试验考核后,在沙漠车上完成了11200km以上的道路试验。

【Abstract】 By using an optimum gas pressure sintering (GPS) process, silicon nitride ceramic materials with excellent properties was fabricated. Its bending strength and fracture toughness are 700~ 800MPa and 7-8MPa·m1/2 at room temperature respectively. The silicon nitride valve guides exhibit good performance during uncooled diesel engine tests. The uncooled diesel engine constructed was rig-tested for 700h. This engine was installed in a truck driven in the desert and road-tested for more than 11200km.

【关键词】 氮化硅陶瓷气压烧结气门导管发动机
【基金】 国家八·五攻关资助项目
  • 【文献出处】 机械工程材料 ,Materials For Mechanical Engineering , 编辑部邮箱 ,1996年06期
  • 【分类号】TQ174
  • 【下载频次】91
节点文献中: 

本文链接的文献网络图示:

本文的引文网络