节点文献

等离子炉熔炼碳铬铁

RESEARCH ON SMELTING LOW-CARBON FERROCHROME IN A PLASMA FURNACE

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李慧仇永全万天骥任大宁

【Author】 LI HUI;CHOU YONGQUAN;WAN TIANJI;REN DANING(Department of Metalllurgy, USTB, Beijing 100083,PRC)

【机构】 北京科技大学治金系

【摘要】 采用以氮气为工作气体的非转移等离子枪,在密闭熔炼炉内熔化块状高碳铬铁,加热至1600℃后开始由顶部向熔池供氧降碳,同时继续加热使熔池温度维持在高于1750℃,熔池底部通氮气搅拌.试验获得了含碳,铬分别为0.45%,20.25%和0.42%,70.25%的低碳铬铁,铬的氧化损失保持在5%以下.关键词

【Abstract】 By a non-transformed arc plasma torch whose gas is nitrogen,scrap of high-carbon ferrochrome was heated and melted in a sealed furnace. When the liquid bath was at 1600℃,top blowing of oxygen began to decrease the bath’s carbon without stopping plasma operation for its temperature addition and maintennace of at least 1750 ℃. The liquid bath was agitated by bottom-blowning nitrogen. In the experiments low carbon Fe-Cr have been obtained whose composition respectively was 0.45% carbon,50.75% chrome and 0.42% carbon, 70.25% chrome. Loss of chrome could be less than 5%.

【关键词】 等离子炉铬铁熔炼
【Key words】 plasma furnaceferrchromesmelting
  • 【文献出处】 Journal of University of Science and Technology Beijing(English Edition) ,北京科技大学学报(英文版) , 编辑部邮箱 ,1996年01期
  • 【分类号】TF641.31
  • 【被引频次】1
  • 【下载频次】111
节点文献中: 

本文链接的文献网络图示:

本文的引文网络