【摘要】 塞平—1并用1．25°单弯螺杆动力钻具造斜时，发生钻头加不上钻压的现象。通过理论分析，认为是扶正器自锁造成的。所谓扶正器自锁，就是扶正器相对的上下缘同时接触井壁，使所加的钻石完全被摩阻所抵消。扶正器在井眼内是否会发生自锁，主要取决于扶正器母线与井眼轴线的夹角是否大于自锁角。自锁角的大小主要取决于井眼直径、扶正器直径和长度。根据分析，缩短了扶正器长度，使扶正器外径以球状小斜角向本体过渡，结果克服了自锁，消除了钻头加不上钻压的现象，使塞平—1井顺利完成。更多还原

【Abstract】 The one of troubles met during drilling Saiping 1 well is that the weight can’t forced on bit when using PDM with bent sub of 1. 25 degree. Through theoretical analysis,it is believe that stabilizrs self-locking occurred during building up. The self-locking effect made the bit of weght was compietely off peted by friction and drag. The self-locking effect depend on the angle between the generatin llne of stabilizer and the akial line of borehole, if that angle larger than self - locking angle which depending on diameter of borehole and stabilirers and stabilizer’s length, According to the analyzing results, improving stabilizer’s profile and shorting its length made the self - locking effect be overcomed.更多还原