节点文献

EPC法干砂造型三维振实台设计计算

The Design of 3-D Vibrating Compact Table for the EPC Process with Dry Sand

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 冀守勋张俊德万里张映宏

【Author】 Ji ShouxunDept.of Materials Sci;&Eng.,H.U.s.T.,Wuhan 430074, China.;Zhang Junde;Wan Li;Zhang Yinghong

【机构】 华中理工大学材料科学与工程系

【摘要】 阐述了所研制的三维振实台结构、工作原理、控制方法及振实工艺;对影响砂型振实效果的主要初始参数振动加速度和振动频率作了详尽分析和合理选用;对缓冲空气弹簧的垂直与横向刚度和所需振动电机激振力及其自同步转动的效果进行了详细的计算。经测试验证,实际振动加速度与计算数据基本相符。

【Abstract】 In order to obtain highly accurate and good finish castings by the EPC process the drysand,the sand should be perfectly filled into every recess around the evaporative patternwith sufficient compactness without spoiling the EPC pattern,To do this,a molding ma-chine with a 3-D vibrating compact table at high frequency and low vibration amplitude hasbeen developed and has been operating satisfactorily in production,The structure,principle,control and operating procedure of the machine are described.The main parameters,such asthe vibration acceleration, vibration frequency,which will affect the vibration performance,are discussed. The rigidity of the air spring buffer in the vertical and horizontal direction,the exciting force to be provided by the motors,and the effect of self-synchronizing rotationare calculated in detail. Test results show a good agreement between calculated vibrationalacceleration and the measured one.

【关键词】 实型铸造三维振实设计计算
【Key words】 full mould casting3-D vibrationdesigncalculation
【基金】 湖北省科委重点科技攻关项目
  • 【分类号】TG231.63
  • 【被引频次】4
  • 【下载频次】107
节点文献中: 

本文链接的文献网络图示:

本文的引文网络