节点文献

RIM聚氨酯快速反应动力学研究

KINETIC STUDY OF REACTION INJECTION MOLDING OF POLYURETHANE

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 潘碧莲徐强姜志国

【Author】 Pan Bilian, Xu Qiang and Jiang Zhiguo.(Polymer Science Department, Beijing Institute of Chemical Technology, Beijing)

【机构】 北京化工学院高分子系北京化工学院高分子系 北京 10029北京 10029 化工部黎明化工研究院北京 10029

【摘要】 用自行研制的绝热流变仪研究了RIM聚氨酯快速反应动力学。确定了以二丁基锡二月桂酸酯[DBTDL]为催化剂时,高活性聚醚和改性MDI的反应动力学方程。当[DBTDB]<0.56mol/m~3时,非催化反应起主要作用,在整个转化率范围内符合二级反应动力学;当[DBTDL]≥0.56mol/m~3时,催化反应为主,二级反应只在凝胶点之前适用。改进了Macesko机理,合理地解释了RIM聚氨酯快速反应历程。

【Abstract】 The kinetics of a fast polyurethane cure (RIM) was studied with a homemade adiabatic rheomcter. The kinetic equation of the fast polymerization between polyether polyol and modifed MDI with DBTDL as catalyst was derived. When the DBTDL concentration < 0. 56 mol/m3, the catalytic reaction is limited, and second-order kinetic was found in the whole range of the convension observed. Howerver, as the DBTDL concentration > 0. 56 mol/m3, the catalytic reaction dominate, corrsponding to the second-order kinetics until the gelpoint. Simultaneously the Macosko principle was revised and the fast reactive course was explained reasonably.

  • 【文献出处】 高分子材料科学与工程 ,Polymeric Materials Science & Engineering , 编辑部邮箱 ,1993年02期
  • 【被引频次】15
  • 【下载频次】195
节点文献中: 

本文链接的文献网络图示:

本文的引文网络