节点文献
圆锯片模态分析试验的研究
On the Test Research of Modal Analysis of the General Circular Sawblade
【摘要】 本文对普通圆锯片(300mm×25mm×1.6mm×80齿)的自由状态和夹持状态用锤击法激振进行模态分析.结果表明,夹板只对第一阶固有频率有较大提高.
【Abstract】 In this paper, a modal analysis of the general circular sawblade (300mm × 25mm × 1.6mm ×80teeth) was carried out using the method hammering stimulation in free and clamped conditions. The test result shows that clamper greatly increases only the first natural frequency.
【关键词】 模态分析;
固有频率;
振型;
阻尼;
【Key words】 modal analysis; natural frequency; vibration mode shape; damp;
【Key words】 modal analysis; natural frequency; vibration mode shape; damp;
- 【文献出处】 北京林业大学学报 ,Journal of Beijing Forestry University , 编辑部邮箱 ,1992年03期
- 【分类号】TS643
- 【被引频次】2
- 【下载频次】74