节点文献

包覆燃料颗粒裂变产物释放试验(英文)

FISSION PRODUCT RELEASE EXPERIMENT OF COATED FUEL PARTICLES

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 徐世江杨冰唐春和朱钧国黄锦涛张秉忠罗京汉

【Author】 Xu Shijiang Yang Bing Tang ChunheZhu Junguo Huang Jintao Zhang Binzhong(INSTITUTE OF NUCLEAR ENERGY TECHNOLOGY,TSINGHUA UNIVERSITY,BEIJING)Luo Jinghan (INSTITUTE OF ATOMIC ENERGY,BEIJING)

【机构】 清华大学核能技术设计研究院中国原子能科学研究院 北京北京北京

【摘要】 在中国原子能科学研究院的重水研究堆上辐照了四组包覆颗粒燃料样品,每组分成两份,分别置于两个静态辐照罐中辐照到燃耗为0.394%fima和0.788%fima。辐照冷却后的样品进行了退火试验,测定了133Xe和131I的释放率,测量值都在10-6~10-7。在同样的条件下测定了裸核芯的裂变产物释放率。包覆燃料颗粒的和裸核芯的裂变产物释放率之比在10-5~10-6

【Abstract】 Four samples of coated fuel particles were irradiated in the Heavy-Water Research Reactor of the Institute of Atomic Energy. Each of them was divided into two groups and irradiated up to burn up of 0. 394 % fima and 0. 788 % fima in two static capsules, respectively. After irradiation and cooling, post irradiation annealing experiment was carried out, the release ratios of the fission product 133Xe and 131 were measured, they are in the order of 10-6-10-7. The fission product release ratio of naked kernel was also measured under the same conditions as for the coated fuel particles, the ratio of the fission product release of the coated fuel particles and of the naked kernel was in the order of 10-5-10-6.

  • 【文献出处】 中国核科技报告 ,China Nuclear Science and Technology Report , 编辑部邮箱 ,1991年00期
  • 【下载频次】24
节点文献中: 

本文链接的文献网络图示:

本文的引文网络