节点文献

用二甲苯从湿法冶金残渣中提取元素硫

RECOVERY OF ELEMENTAL SULFUR FROM HYDROMETALLURGICAL RESIDUE BY DIMETHYLBENZENE

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨天足赵天从

【Author】 Yang Tianzu;Zhao Tiancong Department of Nonferrous Metallurgy

【机构】 中南矿冶学院有色冶金系中南矿冶学院有色冶金系

【摘要】 本文研究了用二甲苯作溶剂从湿法冶金残渣中提取元素硫的可能性。确定了浸出过程的主要工艺条件;对含元素硫28.04%的残渣,在温度90℃、浸出时间10min、液固比为5的条件下,可达97.0%的浸出率,浸出渣含元素硫仅1.5%。与其它溶硫的有机溶剂相比,所用二甲苯具有毒性较低,挥发性较小,价格低廉并可循环使用、浸出速度快等特点。

【Abstract】 In this investigation, dimethylbenzene was used as a solvent to recover sulfurfrom hydrometallurgical residue. The sulfur dissolves in dimethylbenzene at highertemperature and crystallizes out when dimethylbenzene containing sulfur is cooledto room temperature. The 97.0% extraction of sulfur was achieved from theresidue containing 28.04% sulfur under the following conditions: temperature90℃, L/S ratio 5 and leaching time 10 min. Dimethylbenzene, which can berecycled, is less toxic and volatile and cheaper than other sulfur-dissolving solventssuch as trichloroethylene, tetrachloroethylene, methylbenzene and benzene.

【关键词】 湿法冶金二甲苯浸出/残余物
【Key words】 hydrometallurgysulfurdimethylbenzeneleaching/residues
  • 【分类号】TQ 125.1
  • 【被引频次】24
  • 【下载频次】116
节点文献中: 

本文链接的文献网络图示:

本文的引文网络