节点文献

石油机械铸锻件显微组织对低温韧性的影响

Effect of the Microstructure on the Low-Temperature Toughness of Castings and Forgings for Petroleum Machinery

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 孙鸿涛钟彦平谢志刚

【Author】 Sun Hongtao, Zhong Yanping, Xie Zhigang

【机构】 兰州石油机械研究所兰州石油机械研究所

【摘要】 试验研究了石油机械铸锻件常用低合金钢的显微组织结构对低温冲击韧性的影响。结果表明,钢材的冲击韧性受显微组织的强烈制约,凡显微组织粗大,出现上贝氏体、游离铁素体的试样均表现出较低的冲击功,而显微组织细微、均匀,碳化物质点弥散化的回火索氏体则具有较高的低温冲击韧性。

【Abstract】 An experimental investigation was made on the effect of the microstructure on the low-temperature toughness of the conventional low alloy steel used for petroleum machinery castings and forgings. It is found that the impact toughness of the steel is greatly constrained by the microstructure. Specimens with coarse microstructure including upper bainite and frce ferrite possess lower impact toughness under low temperature, while those with fine and homogeneous microstructure bearing tempered sorbite with dispersed carbide particles show higher toughness.

【关键词】 显微组织低温冲击韧性
  • 【文献出处】 石油机械 ,China Petroleum Machinery , 编辑部邮箱 ,1990年11期
  • 【下载频次】31
节点文献中: 

本文链接的文献网络图示:

本文的引文网络