节点文献

喷丸对扭转疲劳性能的影响

Shot Peening on Torsion Fatigue

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 何家文马包天吴玉声于永和J.F.Flavenot

【Author】 He Jiawen Ma Baotian Wu Yusheng Yu Yonghe (Res.Inst. for Strength of Metals Xi’an Jiaotong University)J. F.Flave not (CETIM.F ranee)

【机构】 西安交通大学金属材料强度研究所法国机械工业技术中心

【摘要】 对扭转试样进行喷丸和预应变,经强化后试样的对称扭转疲劳极限比磨削态提高20~30%。 断口分析表明,在疲劳极限水平附近运转的扭转疲劳断裂是由正应力引起的,断口与轴线成45°。喷丸试样的硬度分布曲线表明,在表下一定深度存在软化区,而裂纹萌生的位置比软化区更深。 喷丸后扭转疲劳极限提高的主要原因是残余压应力的作用。在喷丸前或后进行预应变均使疲劳极限下降。这和预应变时造成的损伤或在夹杂周围造成裂纹有关,它使疲劳寿命降低。

【Abstract】 The reverse torsion fatigue limit after shot peening and prestrain is higher 20-30% than that of ground one.According to fractography, the specimens fractured near the fatigue limit are caused by normal stress, their fracture surface inclines 45° of the specimen axis.Hardness distributions for shot peened specimen show a softened layer in the subsurface.Compressive residual stress are the main factor in the increase of torsion fatigue limit. Torque prestrain may induce damage or cracks which decrease the reverse torsion fatigue limit of shot peened specimen.

  • 【文献出处】 材料工程 ,Journal of Materials Engineering , 编辑部邮箱 ,1990年02期
  • 【被引频次】2
  • 【下载频次】119
节点文献中: 

本文链接的文献网络图示:

本文的引文网络