节点文献

用慢拉伸法研究GC-4超高强度钢的应力腐蚀开裂敏感性

THE INVESTIGATION OF STRESS CORROSION CRACKING CHARACTE- RISTICS OF GC-4 ULTRA-HIGH STRENGTH STEEL USING SLOW STRAIN RATE TECHNIQUE

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘晓坤王建军金石

【Author】 Northwestern Polytechnical University Liu Xiaokun Wang Jianjun and Jin Shi

【机构】 西北工业大学西北工业大学

【摘要】 本文采用慢拉伸试验法研究了GC-4超高强度钢(40CrMnSiMoVA)的应力腐蚀开裂敏感性。结果表明,三种热处理的GC-4钢在典型模拟环境3%NaCl溶液和蒸馏水中都对应力腐蚀开裂敏感。环境介质的存在使该钢的抗拉强度、总应变和断裂能大大降低,而且,阴极极化和阳极极化都使其应力腐蚀开裂敏感性显著提高。分析表明,氢脆和阳极溶解都是导致GC-4钢应力腐蚀开裂的重要原因。

【Abstract】 In this paper, the stress corrosion cracking (SCC) characteristics of GC-4(40CrMnSiMoVA) ultrahigh strength steel is investigated using the slow strain rate technique. The results of three differently heat-treated specimens show that GC-4 steel is sensitive to SCC in both 3 % NaCl solution and distilled water. The strength, percentage elongation and fracture energy of the material are greatly reduced in the presence of corrosive media. Moreover both anodic and cathodic polarization can promote SCC behavior further. It is shown that both hydrogen assisted cracking and anodic dissolution are important factors of SCC of GC-4 steel in 3 % NaCl solution.

  • 【文献出处】 航空学报 ,Acta Aeronautica Et Astronautica Sinica , 编辑部邮箱 ,1989年09期
  • 【被引频次】7
  • 【下载频次】168
节点文献中: 

本文链接的文献网络图示:

本文的引文网络