节点文献
宽温低损耗单模光纤定向耦合器
Wide-Temperature And Low-Loss Single-Mode Directional Coupler
【摘要】 本文报道了用熔融法由常规的单模通信光纤制造宽温工作的低损耗单模光纤定向耦合器.工作波长为1.52μm,分束比为50%的封装器件;工作温度在-30~+70℃范围,分束比容差小于±5%,插入损耗<0.2dB,隔离度>40dB.工作波长的变化对分束比影响十分明显,但入射光的偏振态对其无实际影响.
【Abstract】 This paper describes the fabrication of a wide-temperature and low-loss fused single-mode optioalfibre coupler. The device is fabricated from standard communication fibre. The specifications of the packaga device at 1.52μm are as follows: splitting at 0(?)50%,splitting ratio tolerance <±5%, operating temperature range from -30 to +70℃, insertion loss <0.2dB, directivity >40 dB. The splitting ratio is highly sensitive to operating wavelength, but insensitive to polarization of input light.
【关键词】 熔融法;
单模光纤;
定向耦合器;
【Key words】 fused fabrication method; single-mode fiber; directional coupler.;
【Key words】 fused fabrication method; single-mode fiber; directional coupler.;
- 【文献出处】 光学学报 ,Acta Optica Sinica , 编辑部邮箱 ,1989年01期
- 【被引频次】1
- 【下载频次】41