节点文献

钢铁中微量锡的催化极谱测定

Determination of Microamounts of Tin in Iron and Steel by Catalytic Polarogaphy

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 肖文达; 关长胜; 张锦平; 邱瑞芳;

【Author】 Xiao Wenda Guan Changsheng Zhang Jinping Qiu Rifang (Department of Analysis, Northwestern Research Institute of Mining and Metallurgy, Baiyin)

【机构】 西北矿冶研究院分析室; 西北矿冶研究院分析室 甘肃白银市; 甘肃白银市;

【摘要】 <正> 催化极谱法测锡具有很高的灵敏度,一般可测至0.0001%。主要有锡—卤素—钒体系、锡—硫酸—氯化钠—氯化四苯胂体系等,其中以锡—卤素—钒体系的灵敏度最高。我们对锡—卤素—钒体系进行了筛选,并确定利用高氯酸和碘化钾的反应制备氢碘酸作底液来测定钢铁中微量锡的分析流程。本法可不经任何分离和富集手续,直接测定0.0001~0.1%的锡,测定0.0x%时,相对偏差小于10%,分析结果与标准值很吻合。 一、仪器与试剂 JP—1A型示波极谱仪,三电极系统,在导数电路上并联1个10000PF的电容器。 盐酸为特纯试剂,硝酸、高氯酸、碘化钾均为优级纯试剂,其余试剂为分析纯级。 所用的水为二次离子交换水。

【Abstract】 A catalytic palarography is proposed for the determination of microamounts of tin in iron and steel. The experimental conditions of the method have been studied. This method can directly determine 0.0001-0.1% Sn without preliminary seperation and concentration. The analytical results of standard samples obtained by this method are in good agreement with the standard values.

  • 【文献出处】 冶金分析 ,Metallurgical Analysis , 编辑部邮箱 ,1988年03期
  • 【被引频次】1
  • 【下载频次】23
节点文献中: 

本文链接的文献网络图示:

本文的引文网络