节点文献
D4等离子体聚合物复合膜的制备、形成过程及其氧氮分离性
THE PREPARATION AND THE FORMATION PROCESS OF D4 PLASMA POLYMER COMPOSITE MEMBRANES AND THEIR OXYGEN-NITROGEN SEPARATION PROPERTY
【摘要】 <正> 将高分子膜用于气体分离已越来越受到人们的重视.在特定条件下,用等离子体聚合可形成高分子超薄膜,它有高度交联结构,表面平整、致密、无针孔.因此,将它用于气体分离是有希望的.本工作用八甲基环四硅氧烷(简称D4)作单体,进行等离子体聚合,沉积在聚丙烯多孔底膜上,得到D4等离子体聚合物复合膜.研究表明,该膜有较好的气体透过性能,其氧气透过速率Jo2为0.5—2×10-5cm3(STP)/cm2·sec·cmHg,氧氮分离系数。αo/N为3.3—3.8,远远高于用经典方法制得的聚有机硅氧烷膜的αo/N2.0.
【Abstract】 The cyclooctamethyltetrasiloxane (D4) plasma composited membranes were prepared by D4 plasma polymer deposited on the porous polypropylene substrate under the conditions of frequency 13.56 MH power 50-100 W, pressure 0.05-0.2 mbar, low-electrode temperature 20±2℃, deposite time 7-60 min. The oxygen permeation rate Jo2 andd oxygen-nitrogen separation coeff. αo/N of the obtained membranes are 0.5-2×10-5 cm3(STP)/cm2·sec·cmHg and 3.3-3.8, respectively. The formation process of the composited membranes was studied by means of SEM together with the gas peameation properties of the membranes obtained at different reaction time.
【Key words】 Cyclooctamethyltetrasiloxane (D4); Plasma polymer; Composite membrane; Oxygen-nitrogen separation;
- 【文献出处】 高分子学报 ,Acta Polymerica Sinica , 编辑部邮箱 ,1988年03期
- 【被引频次】7
- 【下载频次】54